Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM 1

Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM 2

Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM 3

Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM 4

Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM 5

Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM 6

Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM 7

Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM

At first light on the production floor, the Precision TCT Blade for Alu & Cardboard slips into the machine and carves razor-clean, burr-free edges as if guided by a master craftsman. HF laser trimming and hot-press bonding fuse a rock-solid tungsten-carbide tip to a perfectly honed body, giving each blade consistent strength, whisper-quiet operation, and long life. OEM-ready and built for repeatable perfection, it turns every cut into a confident, production-ready finish that elevates your output.

Lead Time:

1-10(pieces):8(days),11-100(pieces):30(days),101-1000(pieces):45(days),>1000(pieces):To be negotiated(days)

Place of Origin:

China

Customization:

Customized logo (Min. Order: 50 sets),Customized packaging (Min. Order: 500 sets),Graphic customization (Min. Order: 500 sets)

Samples:

$90.0/piece | Min. order : 1 piece

Shipping:

Support Sea freight

Payments:

L/C,D/A,D/P,T/T,Western Union,MoneyGram,OA

model number:

18 inch 455x4.0x100BT

brand name:

X&H or OEM

Inquiry

Write a Review

Body Thickness

3.2mm

Performance

Smooth, Low Noise, No Burrs, Excellent Lifetime and Cut Quality

Machine

Miter Saw, Aluminum Cut Off Saw, Portable Saws

kerf

4.0mm

Arbor Hole Size

1"25.4mm or 30mm

Tooth Pattern

Number of Teeth

100

Advantage

Using advanced Germany Technology

Diameter

18"455mm

Application

Aluminum Profile, Aluminum Alloy,Brass,Non Ferrous

blade width

0.157

grade

precision

Saw Blade Size

18 inch 455x4.0x100BT

finishing

White or As Your Request

place of origin

Shanghai, China

customized support

OEM, ODM, OBM

process type

Hot Press, High Frequency Welded, Laser welded, Cold Press

edge height

0.315in(8mm)

blade diameter

18 in(45.72cm)

blade length

6 1/2 in

teeth per inch

Other

arbor size

1in(2.54cm)

Cutting Thickness

0.014in, 0.032 in, 0.05in, 0.02in, 0.035 in, 0.018in, 0.042in, 0.025in

warranty

3 Years

Accurate Cuts, OEM-Quality Packaging

Engineered for clean, burr-free cuts in aluminum profiles, the TCT Saw Blade Precision Grade maximizes throughput and reduces rework across miter, portable and cut-off saws. With diameters from 255mm to 1200mm, BT tooth patterns, tungsten-carbide tips and a special-steel body, the thin-kerf circular shape and precision tooth geometry deliver repeatable accuracy, while white or custom finishes and sturdy labeled packaging protect blades in transit. OEM options, short lead times and hands-on technical support ensure you receive the exact tooth count, kerf and finish style to match your production needs and keep your line running.

Precision TCT Versatile Durable

The TCT Saw Blade Precision Grade features tungsten carbide tips brazed to a special-steel body with BT tooth geometry, available in diameters from 255mm to 1200mm, body thickness 1.6–9.0mm, kerf 2.0–10.0mm and tooth counts from 60T to 144T for tailored cuts. Manufactured using HF laser/hot-press bonding and finished white or to order under X&H or OEM, it delivers high wear resistance, thermal stability and tight dimensional tolerance to reduce burrs and extend service life on aluminum, aluminum alloy and brass. Designed for miter saws, aluminum cut-off and portable saws with customizable inner diameters and tooth patterns, this precision blade offers fast, low-vibration cutting, improved throughput and technical support to maximize productivity.

Precision TCT for Alu/Cardboard

The TCT Saw Blade Precision Grade is a high-accuracy circular blade made in Shanghai for cutting aluminum profiles, aluminum alloy and brass, produced using HF laser and hot-press techniques for consistent performance. It features tungsten carbide tips on a special steel body, with customizable diameters (255–1200mm), inner diameters, kerfs, body thicknesses and tooth counts (60T–144T) in a BT tooth pattern for miter saws, aluminum cut-off saws and portable saws. Available from X&H or OEM, these precision blades come with technical support, typical 5–20 day delivery and a sharp cutting edge—please handle with care.

◎ product nicety 1

◎ product nicety 2

◎ product nicety 3

Precision, Durability, Cleanliness, Versatility

The TCT Saw Blade Precision Grade is produced by an experienced OEM using HF laser welding and hot-press bonding to ensure micro-accurate tooth geometry and long-life carbide tips for clean, burr-free cuts in aluminum and corrugated cardboard. Its precision tooth profile, balanced body, and optimized gullet design deliver high feed rates, minimal vibration, and superior chip evacuation while thermal-stable bonding preserves cutting edge integrity under high-speed operation. Features include premium micro-grain carbide, corrosion-resistant coatings, and strict QA tolerances; advantages are extended service life, consistent dimensional accuracy, reduced downtime, and cost-effective performance for industrial packaging and aluminum fabrication.

Material introduction

The TCT Saw Blade Precision Grade features tungsten carbide tips brazed to a high-strength special steel body, providing wear-resistant, micro-sharp cutting edges tailored for aluminum profiles and cardboard. Manufactured using HF laser sharpening and hot-press bonding, the blades achieve tight tolerances, consistent kerf and body thickness ranges, and a BT tooth pattern available in 60–144T for clean, burr-free cuts. Finished in white or per OEM specification, this material-focused design balances toughness and thermal stability for long service life in miter, portable and aluminum cut-off saw applications.

◎ Precision TCT Blade Alu & Cardboard

◎ OEM-Controlled TCT Cutting Blade

◎ BT-Pattern Alu/Cardboard TCT Saw

FAQ

What is the "Precision TCT Blade Alu & Cardboard, HF Laser/HotPress, OEM" intended for?

This is a tungsten-carbide-tipped (TCT) precision cutting blade designed for clean, repeatable cutting and trimming of aluminum (thin sheet, foils, profiles) and various paperboard/corrugated board grades. It is built for industrial workflows that include high-frequency (HF) cutting equipment and hot-press/lamination lines, and can be supplied as an OEM part to integrate into original equipment.

Which machines and application scenarios is the blade compatible with?

The blade is made to fit HF (high-frequency) oscillating/impact cutters, hot-press trimming stations and production lines that require a mechanical cutting edge (including processes that pair laser scoring or laser-guided layout with mechanical trim). It works well for die-trimming, slitting, trimming after lamination or hot-press bonding, and precision trim operations on aluminum parts and corrugated/solid board panels. Always confirm holder shank size, hole pattern and mounting geometry with your machine spec.

How should I install and set up the blade for best cutting performance?

Mount the blade securely in the specified holder, checking orientation and runout per the machine manual. Tighten fasteners to the manufacturer’s torque spec and perform a short break-in sequence. For cardboard use higher feed rates and moderate blade engagement for clean shearing; for aluminum use lower feed and shallower depth per pass to avoid built-up edge and vibration. Verify blade clearance, alignment, and perform test cuts—adjust feed, stroke frequency, and depth incrementally until edge quality and tool load are optimal. Always follow your machine’s recommended parameters.

How do I maintain, sharpen or replace the TCT blade, and what affects its lifetime?

Maintenance includes regular cleaning of chips/adhesives, inspection for chipping or nose wear, and checking mounting accuracy. TCT tips are hard-wearing but will eventually show edge rounding or chipping; regrinding by a qualified carbide service or replacement is recommended once cut quality degrades or forces rise. Lifetime depends on material abrasiveness, run time, cutting depth and heat exposure—cardboard typically causes less wear than abrasive aluminum alloys or contaminated materials. Monitor for signs like torn edges, burring, increased scrap, or higher motor load.

What safety precautions should I follow when using or changing this blade?

Always lock out and tag out the machine before installing, adjusting or removing the blade. Wear cut-resistant gloves and eye protection when handling blades. Keep hands away from the cutting edge, use protective covers during storage and transport, and dispose of or store worn blades in a safe container. Ensure guards and safety interlocks on the machine are functional before resuming production.

Can this blade be customized for OEM or special applications?

Yes. OEM customization options commonly include different tip grades of carbide, edge geometry (rake/clearance angles, chamfers), special coatings, custom lengths/shank sizes, mounting holes, brazing methods and tight dimensional tolerances. Minimum order quantities, lead times and engineering drawings will be required—contact the supplier with your application details (material types, thickness ranges, machine holder drawings and expected production volumes) for a quotation.

Speak with a trusted advisor

If you are looking for sawing tools and reliable solutions, please feel free to contact ELEFANTE TOOLS.