TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish 1

TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish 2

TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish 3

TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish 4

TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish 5

TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish 6

TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish 7

TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish

The TCT Thin Kerf Blade for Aluminum is a tungsten-carbide-tipped saw blade with a narrow kerf made for clean, fast cuts in aluminum. Its thin kerf cuts with less waste, lower cutting force and heat, giving smoother edges and fewer burrs. OEM laser-welded tips and a protective varnish increase tip strength, corrosion resistance and blade life for reliable high-speed or production use.

Lead Time:

1-500(pieces):8(days),501-1000(pieces):30(days),>1000(pieces):To be negotiated(days)

Place of Origin:

China

Customization:

Customized logo (Min. Order: 1 sets),Customized packaging (Min. Order: 10 sets),Graphic customization (Min. Order: 10 sets)

Samples:

$64.0/piece | Min. order : 1 piece

Shipping:

Support Sea freight

Payments:

L/C,D/A,D/P,T/T,Western Union,MoneyGram,OA

brand name:

X&H

Inquiry

Write a Review

Performance

stable and better wear resistance

Machine

Aluminum cutting machine, single-double head saw

kerf

0.071in/1.8mm-0.315in/8mm or As Your Request

Arbor Hole Size

1"25.4mm or As Your Request

Finishing

White or As Your Request

Tooth Pattern

BC,BT or As Your Request

Tip Material

Tungsten Carbide Steel

Number of Teeth

12T-180T or As Your Request

Diameter

6"150mm-48"1200mm or As Your Request

Product Name

Thin Kerf Saw Blades for Aluminum

blade width

0.125in(0.32cm)

grade

precision

Saw Blade Size

455x25.4x3.2x100T

place of origin

Shanghai, China

customized support

OEM, ODM, OBM

process type

Hot Press, High Frequency Welded, Laser welded, Cold Press

edge height

0.315in(8mm)

blade diameter

18 in(45.72cm)

blade length

6 1/2 in

teeth per inch

Other

arbor size

1In(2.54cm)

Cutting Thickness

0.014in, 0.032 in, 0.02in, 0.018in

warranty

3 Years

Precision Cuts, Laser-Welded Durability

TCT thin-kerf saw blades for Aluminum & Copper deliver precision, fast, burr-free cuts and reduced material waste thanks to a narrow kerf and tungsten-carbide tips. OEM laser-welded joints and a varnish finish protect the special-steel body for extended life, balanced performance and consistent cut quality across diameters, tooth counts and blade thicknesses. Packaged securely in OEM cartons, the thin-profile shape, polished style and professional-grade construction simplify handling, installation and compatibility with single- or double-head aluminum cutting machines.

Precision Laser-Welded Aluminum Cutting

The OEM laser-welded varnish, tungsten carbide tips and special steel body combine into a professional-grade TCT thin-kerf blade that offers high hardness, heat resistance and long service life. With kerf options from 0.071–0.315 in, thicknesses 0.2–10 mm, diameters 150–1200 mm and up to 180 teeth, it minimizes material loss, reduces vibration and delivers clean, burr-free cuts for Aluminum profiles and solid stock and is designed for Aluminum & Copper applications on single- or double-head saws. Laser welding and customizable bore, tooth count and finishing ensure consistent chip evacuation, reliable mounting and economical performance for high-speed, precision metalworking.

Precision Laser-Welded Aluminum Blade

This TCT thin-kerf saw blade features tungsten carbide tips and a special steel body with OEM laser-welded varnish for durability and precise cutting. Available in diameters from 150mm to 1200mm, kerfs from 1.8mm to 8mm, and tooth counts from 12T to 180T, it is built for aluminum profile and solid aluminum machining on single- or double-head saws. Engineered as professional-grade tooling, it delivers efficient, low-waste cuts for Aluminum & Copper and can be customized in thickness, inner diameter and finishing to meet specific production needs.

◎ product nicety 1

◎ product nicety 2

◎ product nicety 3

Precise Thin-Kerf Durable Cutting

Built by a precision tooling brand with rigorous QC, the TCT Thin Kerf Blade features high-grade tungsten carbide tips and an OEM laser-welded varnish bond that preserves tip retention and blade geometry under heavy use. Engineered for Aluminum & Copper, its thin-kerf profile and optimized tooth geometry cut with low cutting force and minimal burrs, reducing scrap and improving cycle times. Additional highlights include corrosion-resistant coating, dynamic balancing for vibration-free running, and easy retrofit to standard spindles—delivering longer life, better surface finish, and a lower cost-per-part.

Material introduction

TCT thin kerf blades use tungsten carbide tips laser-welded to a high-strength special steel body for precision cutting and long-lasting tip retention. An OEM varnish finish provides corrosion and heat protection while maintaining the slim kerf to reduce material loss. Engineered for Aluminum & Copper applications, these blades offer professional-grade performance across a wide range of diameters, tooth counts, and thicknesses to match specific machines and cutting needs.

◎ Laser-Welded Carbide Edge

◎ Slim Kerf Precision Cut

◎ High Speed Durability

FAQ

What materials and cutting tasks is the TCT Thin Kerf Blade for Aluminum - OEM Laser-Welded Varnish best suited for?

It is designed primarily for non-ferrous metals — especially aluminum and its alloys, including extrusions, profiles, tubes, sheet and solid bars. Common applications include window/door fabrication, HVAC duct and profile cutting, automotive and aerospace non-ferrous component shops, and general metal fabrication where clean, burr‑minimized cuts in aluminum are required. It can also perform well on brass, copper and some plastics, but is not intended for cutting hardened steel or abrasive materials.

Why choose a thin kerf TCT blade with OEM laser-welded varnish for aluminum work?

The thin kerf reduces material loss, lowers cutting forces and reduces power draw, which improves throughput and reduces heat buildup in thin-walled aluminum. The TCT (tungsten‑carbide‑tipped) teeth maintain edge life and resist wear. The OEM laser-welded varnish (protective coating and laser-welded joint) improves tip retention and corrosion resistance, reduces chip buildup and improves durability under high-speed cutting typical of aluminum work.

What saw types and setup considerations are recommended when using this blade?

Use on circular saws, miter saws, cold saws and dedicated aluminum saws that accept TCT blades and match the blade diameter and arbor specification. Ensure the machine’s maximum RPM is not exceeded, the blade is mounted flat against a clean flange with correct torque, and workpieces are securely clamped. Use appropriate guards and a stable feed rate to avoid dwell or rubbing. Check blade runout and replace if wobble or damage is present.

Do I need coolant, specific feeds or tooth counts for best results?

For aluminum, using a light cutting fluid or dedicated aluminum lubricant often yields cleaner cuts and reduces gumming; however, many thin-kerf setups run dry if chip evacuation is good. Select tooth geometry and TPI based on cut type — higher tooth counts or positive-hook finishing teeth for fine, burr‑free crosscuts; lower tooth counts for roughing or thicker stock. Adjust feed so the blade engages the material smoothly without excessive rubbing; exact RPM/feeds depend on blade diameter, machine and alloy — follow machine and blade manufacturer guidance.

How should I maintain and extend the life of this blade?

Regularly clean aluminum deposits and pitch from the teeth and gullets using an appropriate solvent or blade cleaner. Inspect the laser‑welded joints and varnish for damage; replace the blade if welding cracks or carbide tip loss occurs. Avoid cutting abrasive materials or contaminated stock (e.g., aluminum with embedded steel), and store the blade dry and protected. Re-tipping or professional carbide regrinding may be possible through qualified services—follow the blade maker’s recommendations.

What safety precautions and common mistakes should I avoid when using this blade?

Always wear appropriate PPE (eye and hearing protection, gloves when handling, face shield when necessary) and use proper guards. Do not exceed the blade’s rated RPM or use it on incompatible materials (ferrous or highly abrasive items). Avoid forcing the cut or using excessive feed rates that cause heat buildup or tooth breakage. Secure workpieces to avoid kickback, and stop the machine before making adjustments. Regularly check for chips, cracks or tip loss and replace the blade immediately if damage is found.

Speak with a trusted advisor

If you are looking for sawing tools and reliable solutions, please feel free to contact ELEFANTE TOOLS.